Protection & Hardware * | Dmm Hb Brass Offsets

Dmm Hb Brass Offsets Are Crucial For Protecting Small Flared Cracks, Often Fitting Perfectly Where Nothing Else Will Go.

The Brass Used For The Head Of The Nut Is Soft Enough To Bite Into Placements, But Hard Enough To Resist Deforming And Pulling Through. Wires Are Soldered Directly Into The Nut Head, Allowing A Thicker Wire To Be Used And Increasing Overall Strength. The Color-Coded Swage Gives Easy Size Selection And Allows The Brass Offset To Self-Equalize When Loaded, Making The Most Of Marginal Placements.

Each Sold Individually.

Other Features: Micro Protection For Small Cracks
As Climbs Become Harder, The Need To Make The Most Of All Available Protection Increases. Micro Protection Lets You Protect Cracks In Which Normal-Sized Pieces Would Not Fit. Having These Wires On Your Rack Gives You More Options.

Asymmetrical Taper Gives Stable Placements In Offset Cracks
Nuts With An Offset Taper Protect Cracks Where Normal Nuts Would Not Sit Properly, Such As Flared Cracks And Piton Scars. Use In Combination With Normal Nuts To Find Security In Almost Any Crack.

Wires Soldered Directly Into Heads For Strength
The Wires Of Brass Offsets Are Soldered Directly Into Their Heads. This Allows A Thicker Wire To Be Used, Increasing The Strength Rating Of Each Nut.

Brass Heads For Optimal Characteristics In Marginal Placements.
Brass Nuts Are Made From A Special Blend Of Brass And Silicone That Is Soft Enough To Bite Into Placements, But Hard Enough To Resist Pulling Through Them. This Helps Them Make The Most Of Marginal Placements.

Color-Coded For Easy Size Identification
The Dmm Protection Range Is Color-Coded For Quick And Easy Size Selection. Colors Are Coordinated Across Passive And Active Protection, For Quick Selection Of Alternatives If Your First Choice Doesn’T Fit.

Passive Protection Works In Wet And Icy Conditions
Passive Protection Works By Jamming In Constrictions To Prevent Falls. It Is Suitable For Use In All Conditions. Unlike Active Protection Such As Cams, Passive Protection Can Be Used In Wet Or Icy Cracks, Where Friction Is Reduced.